Sauƙaƙe shigar da Filastik ɗin Plastics Hadedde WPC Decking

Short Bayani:

Mallakar kayayyakin: WPC Decking

Abu Babu: LH145H22

Biya: TT / LC

Farashi: $ 2.52 / M

Asalin Samfura: Kasar China

Launi: Itacen al'ul, cakulan, gawayi, launin ruwan kasa, da dai sauransu

Jirgin Ruwa: Tashar jiragen ruwa ta Shanghai

Lokacin jagora: KWANA 10-15


Bayanin Samfura

Tsarin Girka

Alamar samfur

Suna

Wajen WPC na waje

Abu

LS145H22

Sashe

 a12

Nisa

145mm

Kauri

22mm

Nauyi

2900g / m

Yawa

1350kg / m³

Tsawon

2.4m 3.6m ko na musamman

Aikace-aikace

Villas, Dandalin waje

Kula da Surface

Grooves + Flat

Garanti

Shekaru biyar

 

Kayan Samfura

  1. WPC kayan ado babban abu shine PE, zaren itace da ƙari .Mut WPC kayan ado sananne ne a duk duniya yayin da muke amfani da kayan ɗabi'a.
  2. ● Kayan mu na WPC yana da kyau da kyau na yanayin ƙirar hatsi, taɓa tare da sauƙin shigarwa, don haka zai iya biyan buƙatu daban-daban na abokan ciniki.Ya iya zama aski, ƙusa, huda da yanke don dacewa da kayan haɗi na bayanai dalla-dalla, kamar shimfidar wuri, lambun waje, wurin shakatawa, babban kanti, da sauransu.
  3. Kayanmu na WPC yana da ƙarancin muhalli, ba za'a iya sake yin amfani dashi ba kuma babu wani sinadarin haɗari, baya buƙatar zane, babu mannawa da ƙarancin kulawa.
  4. ● Kayanmu yana da ƙwarewar yanayi mai kyau, zai iya dacewa daga -40 ℃ zuwa + 60 60 .An iya amfani da kayan kwalliyarmu na WPC a duk duniya.Domin allonmu na da tsayayyar yanayi, hana zamewa, fewan fasa, warp, mara ƙafafu .Plus UV ƙari sanya allon mu UV juriya, shuɗewa da dorewa.Good girma kwanciyar hankali kan danshi da zafin jiki.

8668fc8f 4cecbcf1

 

Takardar bayanai

SAMAR DA KAYAN KAYA

Abu

Daidaitacce

Bukatun

Sakamakon

Slip Resistance Dry

EN 15534-1: 2014 Sashe6.4.2 CEN / TS 15676: 2007 EN 15534-4: 2014 Sashe 4.4

Darajar Pendulum ≥ 36

Jagorar Longtitudinal: Ma'anar 72, Min 70 Jagorar kwance: Ma'ana 79, Min 78

Slip Resistance Rigar

EN 15534-1: 2014 Sashe6.4.2 CEN / TS 15676: 2007 EN 15534-4: 2014 Sashe 4.4

Darajar Pendulum ≥ 36

Jagorar Longtitudinal: Ma'anar 46, Min 44 Jagorar kwance: Ma'ana 55, Min 53

Faduwar tasirin tasirin taro

EN 15534-1: 2014 Sashe7.1.2.1 EN 15534-4: 2014 Sashe 4.5.1

Babu ɗayan ra'ayoyin da zai gaza tare da tsagewar tsayi≥10mm ko zurfin abin da bai saura ba00mm

Max.Crack tsawon (mm): Babu fasa Max.Rashin sakewa (mm): 0.31

Abubuwan sassauci

EN15534-1: 2014 AnnexA EN 15534-4: 2014 Sashe 4.5.2

-F'max: Ma'ana≥3300N, Min≥3000N

-Bayan gani a karkashin lodi na 500N Mean≤2.0mm, Max≤2.5mm

Barfin Bending: 27.4 MPa Modulus na elasiticity: 3969 MPa Matsakaicin Matsakaici: Ma'ana 3786N, Min 3540N Sauyawa a 500N: Ma'ana: 0.86mm, Max: 0.99mm

Creep hali

EN 15534-1: 2014 Sashe7.4.1 EN 15534-4: 2014 Sashe 4.5.3

Sanannen tsawon amfani: Ma'ana ∆S≤10mm, Max MaxS≤13mm, Ma'anar ∆Sr≤5mm

Tsare: 330mm, Ma'anar ∆S 1.65mm, Max ∆S 1.72mm, Ma'anar ∆Sr 1.27mm

Kumburawa da shan ruwa

EN 15534-1: 2014 Sashe8.3.1 EN 15534-4: 2014 Sashe 4.5.5

Meanunƙarar Ma'ana: ≤4% a kauri, -0.8% a faɗi, -0.4% a tsawon Max kumburi: -5% cikin kauri, -1.2% a faɗi, -0.6% a tsayi Ruwan sha: Ma'ana: -7%, Max : ≤9%

Ma'ana Kumburi: 1.81% a kauri, 0.22% a faɗi, 0.36% a tsayi Max Kumbura: 2.36% a kauri, 0.23% a faɗi, 0.44% a tsayin Sha ruwan: Ma'ana: 4.32%, Max: 5.06%

Gwajin Tafasa

EN 15534-1: 2014 Sashe8.3.3 EN 15534-4: 2014 Sashe 4.5.5

Sha ruwa cikin nauyi: Mean≤7%, Max≤9%

Shawar ruwa cikin nauyi: Ma'ana: 3.06%, Max: 3.34%

Arirgar thermal fadada coefficient

EN 15534-1: 2014 Sashe9.2 EN 15534-4: 2014 Sashe 4.5.6 ISO 11359-2: 1999

≤50 × 10⁻⁶ K⁻¹

34.2 x10⁻⁶ K⁻¹

Tsayayya ga shigar ciki

EN 15534-1: 2014 Sashe7.5 EN 15534-4: 2014 Sashe 4.5.7

Brinell taurin: 79 MPa Rate na sake dawowa roba: 65%

Sauyawar zafi

EN 15534-1: 2014 Sashe9.3 EN 15534-4: 2014 Sashe 4.5.7 EN 479: 2018

Zazzabin Gwaji: 100 ℃ Ma'ana: 0.09%


  • Na Baya:
  • Na gaba:

  • Jagorar Girkawa

    Tare da kafuwa da kulawa da kyau, ana ba da tabbacin kayayyakin itace don samar da shekarun jin daɗin rayuwa a waje. Don cin nasarar shigar da abubuwa marasa matsala na kayan itace:

    -Kidaya lambobin ginin gida kafin kafuwa.

    -Familiarize kanka da umarnin shigarwa.

    -Tabbatar kuna da dukkan kayan aikin da kayan da ake buƙata-kamar yadda aka jera a cikin takardar umarni.

    Ajiyewa da Kulawa

    -Kada ka zubar da kayan itace yayin sauke kaya.

    -Saka a kan shimfidar ƙasa ka rufe shi da kayan da ba translucent ba.

    Lokacin da kake ɗaukar katako na katako, ci gaba da gaba don ingantaccen tallafi.

    -Refer zuwa umarnin shigarwa don ƙarin jagororin akan kowane samfurin.

    Kulawa da Kula da Jagorori Don Decking

    Don rage ƙwanƙwasawa, alaƙar, yanke da tsagi, da adana ƙyallen itace. Bi waɗannan jagororin:

    -Kada ku zame kan juna yayin motsa su. Lokacin cire su daga naúrar, ɗaga hawa kuma saita su ƙasa.

    -Kada ku zame kayan aiki ko jan kayan aiki a saman saman dasukan lokacin gini.

    - Kiyaye saman dutsen ba tare da shara ba. Kwantar da datti da tarkacen gini a fadin shimfidar duwatsu, wanda ke taimakawa wajen tarkon farfajiyar.

    Mahimmin Bayani

    - Yayin aiki da kayan itace ko kowane kayan gini, tabbatar da sanya kyawawan tufafi da kayan tsaro.

    -Domin dukkan kayayyakin itace, ana iya amfani da kayan aikin katako na yau da kullun, kamar yadda umarnin masu sana'anta ya dace.

    -Scrap za'a iya watsar dashi tare da tarkace na yau da kullun.

    -wood na da kyakkyawan zamewa na danshi ko bushe.

    -wood yana da tsarin gindaya a ɓoye kuma yana da sauƙin shigar da shirye-shiryen katako.

    Jagororin Azumi

    -Yi amfani da mafi ƙarancin # 8 x 2-1 / 2 "mai rufi mai inganci, bakin ƙarfe ko dunƙule mai juzu'i.

    -Pre-hakowa ana buƙatar a cikin yanayin sanyi da kuma lokacin cikin tsakanin 1-1 / 2 ”na ƙarshen bene

    -Kada a yi amfani da manne ko kuli a kulle katako ko a kulle mahaɗin tsakanin sassan biyu da kowane abu.Wannan zai hana haɓakar halitta da ƙarancin katako kuma zai kawo cikas ga malalewar jirgin.

    Ana Bukatar iska mai kyau

    - Don rage haɓakar danshi daga ƙarƙashin bene must dole ne a sami mafi ƙaranci

    na 12 ”madaidaiciyar sararin samaniya mara iyaka tare da bangarori uku na shimfidar don ba da damar samun iska ta ketare.

    Wannan yakamata ya kasance a ƙasa da ƙasan marubucin bene.

    -A cikin wasu iyakantattun aikace-aikace, gami da katunan da aka gina akan kusurwa ta ciki, za'a buƙaci ƙarin samun iska a inda shimfidar ta haɗu da ginin. Rashin samarda wadataccen iska zai iya haifar da gazawar saman bene kuma zai ɓata garantin.

    Umarnin shigarwa na Lisen Wood

    Kuna iya adana lokacin gini da farashi ta hanyar yin zane, tsara kasafin kuɗi don abubuwan da ake buƙata bisa ƙirar ƙirar shirin. Zaka iya zaɓar kayanka bisa ga abin da kake so tare da ƙarin nau'ikan zaɓi na itace, aikin katako, ana iya amfani da kayan aikin katako don yanke, sawing, hakowa da sauransu.

    1. Lokacin da kake shigar da kayan ado, da farko ya kamata ka fara nuna damuwa a ƙasa, sannan ka gyara joist ɗin a cikin ƙasa mai taurin. Muna ba da shawarar raɗa raɗa don 35-40cm. Hakanan za'a iya gajarta tazarar Joist kamar yadda aka nema.image001
    2. Yi la'akari da tazarar 3cm zuwa ginin lokacin shigar da kayan ɗumi.image002
    3. Kayan haɗin haɗin decking na katako shirye-shiryen baƙin ƙarfe ne. Hako hakora ya zama ya fi ƙanƙanin diamita dunƙule 3/4 domin haɓaka ƙusoshin ƙusoshin ƙusoshin ƙusoshin ƙusa.image003
    4. Kashe kayan ado a hankali tare da aikace-aikacen guduma na roba yayin aikin don tabbatar da daidaito daidai da kyakkyawan shimfidar gini.image004
    5. Tsawon ƙaramin zanen zai shafi saboda yankin da ya fi girma. Muna ba da shawarar sashin tazarar 5mm lokacin da ake buƙatar giciye.image005
    6. 1.Zaka iya haɗa tsagi da gogewa tare da dunƙule-tsalle-tsalle idan shirye-shiryen bidiyo basa samu don haɗin mahaɗin da kuma kayan ado.image006
    7. Zaɓi ƙarin kwamiti don zama allon gefen gwargwadon girman joist da decking bayan kammala ginin.image007

    Girkawa saure na shirye-shiryen roba

    1. Lokacin da kake shigar da kayan ado, da farko ya kamata ka fara nuna damuwa a ƙasa, sannan ka gyara joist ɗin a cikin ƙasa mai taurin. Muna ba da shawarar jigon jigon don 35-40 cm. Hakanan za'a iya gajarta tazarar Joist kamar yadda aka nema.image008
    2. Yi la'akari da tazarar 3cm zuwa ginin lokacin girka kayan ado.image009
    3. Wani kayan haɗin haɗin haɗin katako shine shirye-shiryen filastik na ƙarfe. Hako hakora ya zama ya fi ƙanƙanin diamita dunƙule 3/4 domin haɓaka ƙusoshin ƙusoshin ƙusoshin ƙusoshin ƙusa.
      image010 image011
    4. Kashe kayan ado a hankali tare da aikace-aikacen guduma na roba yayin aikin don tabbatar da daidaito daidai da kyakkyawan shimfidar gini. image012 image013
    5. Tsawon ƙaramin zanen zai shafi saboda yankin da ya fi girma. Muna ba da shawarar sashin tazarar 5mm lokacin da ake buƙatar giciye.image014
    6. Zaka iya haɗa tsagi da gogewa tare da dunƙule kai-komo idan shirye-shiryen bidiyo ba su da haɗin jakar da kuma ado.image015
    7. Zaɓi ƙarin kwamiti don zama allon gefen gwargwadon girman joist da decking bayan kammala ginin.image016

    Sanya tsayayyen tsari

    1. Lokacin da kake shigar da kayan ado, da farko ya kamata ka fara nuna damuwa a ƙasa, sannan ka gyara joist ɗin a cikin ƙasa mai taurin. Muna ba da shawarar raɗa raɗa don 35-40cm. Hakanan za'a iya gajarta tazarar Joist kamar yadda aka nema.image017
    2. Yi la'akari da tazarar 3cm zuwa ginin lokacin shigar daskararren dutsen Shigar da dutsen mai ƙwanƙwasawa tare da kusoshi masu ganuwa kuma sanya ƙusa 2cm zuwa gefen.image018
    3. Maimaita aikin.image019
    4. Zaɓi ƙarin kwamiti don zama allon gefen gwargwadon girman joist da decking bayan kammala ginin.image020
  • Rubuta sakon ka anan ka turo mana